IRSST - Institut de recherche Robert-Sauvé en santé et en sécurité du travail

Development of a method of measuring nanoparticle penetration through glove materials under conditions simulating workplace use


With the exponential growth in industrial applications of nanotechnologies and the increased risk of occupational exposure to nanomaterials, the precautionary principle has been recommended. To apply this principle, and even though personal protective equipment against nanoparticles must be considered only as a last resort in the risk control strategy, this equipment must be available. To respond to the current lack of tools and knowledge in this area, a method was developed for measuring the penetration of nanoparticles through protective glove materials under conditions simulating workplace use.

This method consists of an experimental device for exposing glove samples to nanoparticles in powder form or in colloidal solution, while at the same time subjecting them to static or dynamic mechanical stresses and conditions simulating the microclimate in the gloves. This device is connected to a data control and acquisition system. To complete the method, a sampling protocol was developed and a series of nanoparticle detection techniques was selected.

Preliminary tests were performed using this method to measure the resistance of four models of protective gloves of different thicknesses made of nitrile, latex, neoprene and butyl to the passage of commercial TiO2 nanoparticles in powder form or colloidal solution. The results seem to indicate possible penetration of the nanoparticles in some types of gloves, particularly when subjected to repeated mechanical deformation and when the nanoparticles are in the form of colloidal solutions. Additional work is necessary to confirm these results, and consideration should be given to the selection of the configurations and values of the parameters that best simulate the different possible workplace situations. Nevertheless, a recommendation can already be issued regarding the need for regular replacement of gloves that have been worn, particularly with the thinnest gloves and when there has been exposure to nanoparticles in colloidal solution.

These results show the relevance of the issue and the importance of pursuing research in this field. Any future work will benefit from the desire for the collaboration and sharing of expertise of other teams interested in protective equipment against nanoparticles.

Additional Information

Category: Research Report
  • Patricia Dolez
  • Ludwig Vinches
  • Gérald Perron
  • Toan Vu-Khanh
  • Philippe Plamondon
  • Gilles L'Espérance
  • Kevin Wilkinson
  • Yves Cloutier
  • Chantal Dion
  • Ginette Truchon
Research Project: 0099-7910
Online since: May 16, 2012
Format: Text