Transfer of competencies in training on machine safety management and on means of protection

Abstract

A previous project (099-042) resulted in training in risk evaluation for hazardous machines and in protective devices. CSST inspectors received this training and can now carry out more effective interventions in plants that use such equipment. To respond to the request from representatives of joint sector-based associations, plant engineering and maintenance personnel, and an engineering faculty, the researchers helped the partners develop training activities for these clients, based on the pedagogical material and methods used for training inspectors. In this context, they defined pedagogical objectives specific to each of the partners, prepared the required material, and offered the training thus produced. As a result of this transfer of competency on the identification of risks of hazardous machines and on the appropriate means of safety, the people who have received this training will be able to pass it on. The method described in this publication may eventually be used to transfer competencies in other fields. The tools used for evaluating the results of the different steps in the transfer of competencies are appended to the report. However, people interested in consulting the pedagogical material produced during the training projects must contact the authors directly.

Produced Under this Project

Scientific Reports

Transfer of competency in training in machine safety management and means of protection Research Report: R-394

Scientific Publications

On track for safety: Risk assessment of a hobby, professional safety
Paques J.-J.
Source :
Professional Safety, vol. 46, no 8 , 2001, p. 2-35
Tools for training and practice to improve machine safety
Bourbonnière R., Trudel C., Duchesnes D., Beaulé L., Paques J.-J., Daigle R.
Source :
in SIAS 2003 : Conférence internationale - Sécurité des systèmes industriels automatisés (3e : 13-15 octobre, 2003 : Nancy), 2003, vol. 8, p. 31-35
Educational approaches to promote in order to favor the transfer of competencies in risk assessment and protective devices training
Lane J., Tardif J., Bourbonnière R.
Source :
in SIAS 2003 : Conférence internationale - Sécurité des systèmes industriels automatisés (3e : 13-15 octobre, 2003 : Nancy), 2003, vol. 8, p. 41-46
Unifying approaches to mechanical engineering design through a multidisciplinary effort
Kron A., Doucet P., Masson P., Van Hoenacker Y., Lapointe J., Micheau P.
Source :
in Proceedings of the American Society for Engineering Education Annual Conference (June 22-25, 2002 : Montréal, Canada), 2002
Transfer of competencies : moving the researcher's expertise toward the initial training of engineers
Doucet P., Lane J., Masson P., Micheau P.
Source :
in SIAS 2003 : 3rd International Conference Safety of Industrial Automated Systems (3rd : 13-15 octobre 2003 : Nancy, France), 2003
Des outils pour la formation et la pratique en amélioration de la sécurité des machines
Bourbonnière R., Trudel C., Duchesne D., Beaulé L., Paques J.-J., Daigle R.
Source :
in Actes du colloque la santé et la sécurité du travail au Québec: une collaboration multidisciplinaire : Congrès de l'ACFAS (11-12 mai, 2004 : Montréal, Canada), Réseau de recherche en santé et en sécurité du travail du Québec / RRSSTQ, 2004, Module A(http://www.rrsstq.com/stock/fra/conferences0037.pdf)
Transfert de compétences en formation sur la gestion de la sécurité des machines et les moyens de protection
Paques J.-J.
Source :
in Colloque sécurité des machines : analyse des risques associés aux machines industrielles, (8 juin, 2004), 2004
Un guide pour une introduction à l’application des catégories de la norme ISO 13489-1
Bourbonnière R., Paques J.-J.
Source :
in Colloque la santé et la sécurité du travail au Québec : Symposium "Perspectives en sécurité des machines et des équipements de protection" : Congrès de l'ACFAS, (11 mai, 2005 : Chicoutimi, Canada), Réseau de recherche en santé et en sécurité du travail du Québec / RRSSTQ, 2005, (http://www.rrsstq.com/stock/fra/conferences0117.pdf)
Enquête auprès d’experts sur la phase d’identification des risques relatifs aux machines industrielles
Paques J.-J.
Source :
Travail et santé, vol. 21, no 3, 2005, S33-S37
Sécurité tous azimuts : Dossier sécurité des machines
Boileau P.-É., Bourbonnière R., Doucet P., Laurent Giraud, Paques J.-J.
Source :
Plan, mars 2006, p. 21-23, (http://www.oiq.qc.ca/documentation/pdf/Art04-securite-azimut.pdf)
La normalisation en sécurité des machines - Partie II
Bourbonnière R.
Source :
Travail et santé, vol. 22, no 1, 2006, p. 50-52

Additional Information

Type: Project

Number: 0099-2160

Status: Completed

Year of completion: 2004

Research Field: Mechanical and Physical Risk Prevention

Team:

Joseph-Jean Paques (IRSST)
Réal Bourbonnière (IRSST)
Patrik Doucet (Université de Sherbrooke)
Renaud Daigle (IRSST)
Patrice Masson (Université de Sherbrooke)
Philippe Micheau (Université de Sherbrooke)
Jacques Tardif (Université de Sherbrooke)