| |  | | 
Research projects Protective equipment
2009
0099-7910Development of a method for measuring nanoparticle penetration through glove materials under conditions simulating workplace use
 Toan Vu-Khanh,
Patricia Dolez
/ École de technologie supérieure Ginette Truchon,
Jaime Lara
/ IRSST Kevin Wilkinson
/ Université de Montréal Gilles L'Espérance
/ École Polytechnique Petros Koutrakis
/ Harvard School of Public Health Yves Cloutier,
Chantal Dion
/ IRSST
0099-5080Optimization of the tool for calculating the service life of organic vapour respirator cartridges
 Jaime Lara
/ IRSST Richard Chahine
/ Institut de recherche sur l'hydrogène - UQTR André Dufresne
/ Université de Montréal Daniel Cossement
/ Université du Québec à Trois-Rivières Daniel Drolet,
Yves Cloutier,
Bernard Caron,
Marie-Ève Lamarche
/ IRSST
2008
0099-6140Preliminary analysis of the effect of contaminants on the cut, puncture and tear resistance of protective gloves
 Toan Vu-Khanh
/ École de technologie supérieure Chantal Gauvin,
Jaime Lara
/ IRSST Patricia Dolez
/ École de technologie supérieure Pierre Drouin
/ IRSST
2007
0099-5190Protective gloves against mechanical attack: the cut, puncture and tear resistance characteristics of new gloves - production of a selection guide
 Chantal Gauvin,
Jaime Lara
/ IRSST Patricia Dolez,
Toan Vu-Khanh
/ École de technologie supérieure Abdelhaq Sari,
François Lemay,
Louis Bousquet,
Pierre Drouin
/ IRSST
0099-3740Anchoring system for guardrails on flat roofs for roofers
 André Lan
/ IRSST Robert Tremblay,
Viacheslav Koval
/ École Polytechnique Louis Bousquet,
Renaud Daigle
/ IRSST
2006
0099-5550Development of a consensus approach to the evaluation of a worker's capacity to wear respiratory protective equipment
 Jaime Lara
/ IRSST Daniel Nadeau
/ Agence de santé et de services sociaux de la Montérégie Candide Fournier
/ Commission de la santé et de la sécurité du travail
0099-4900Characterization of glove resistance to needle puncture. Development of a test method
 Jaime Lara
/ IRSST Toan Vu-Khanh
/ École de technologie supérieure Chantal Gauvin,
Pierre Drouin
/ IRSST
0099-0450Optimization and validation of a tool for selecting protective gloves resistant to single solvents and mixtures of solvents and preparation of a selection guide
 Jaime Lara
/ IRSST Julian X. Zhu,
Gérald Perron
/ Université de Montréal Charles Hansen
/ Consultant Daniel Drolet,
François Lemay
/ IRSST
2005
0099-5710Interactions of solvents and polymers - Industrial and protection applications
 Toan Vu-Khanh
/ École de technologie supérieure Julian X. Zhu
/ Université de Montréal Jaime Lara
/ IRSST
0099-4950Evaluation of different laboratory tests for establishing the level of dexterity offered by protective gloves
 Chantal Gauvin,
Chantal Tellier,
Renaud Daigle,
Esther Cloutier,
Pierre Drouin
/ IRSST
0099-4430Survey of shoring and shielding systems and reduction of the stand-off distance at the top of trenches
 André Lan
/ IRSST Denis LeBoeuf
/ Université Laval Omar Chaallal
/ École de technologie supérieure Renaud Daigle
/ IRSST
0099-3780Characterization of the coefficient of friction of protective glove materials. Development of a dynamometric method for determining coefficients of friction that takes into account hand-glove interactions - Exploratory study
 Toan Vu-Khanh
/ École de technologie supérieure Jaime Lara
/ IRSST Yvan Petit,
Said Jazouli
/ École de technologie supérieure Jérôme Boutin,
Chantal Gauvin,
Bernard Caron,
Pierre Drouin,
Christian Sirard
/ IRSST
2004
0099-3760Characterization of the biomechanical constraints caused by the use of protective gloves. Phase II: Validation of a method for measuring the flexibility of gloves based on surface electromyography
 Toan Vu-Khanh
/ Université de Sherbrooke Jaime Lara,
Christian Larivière
/ IRSST Sylvie Nadeau,
Said Jazouli
/ École de technologie supérieure
0099-3750Updating of the guide on respiratory protection equipment used in Québec
 Jaime Lara,
Abdelhaq Sari,
François Lemay,
Julie McCabe
/ IRSST Charles Beaudry
/ cSHARP
0099-1200Choice of a fall arrest and positioning system for ironworkers
 Jean Arteau,
Yves Beauchamp,
Yvan Petit
/ École de technologie supérieure André Lan
/ IRSST Bruno Massicotte
/ École Polytechnique Bernard Boulé
/ Centre de formation des métiers de l'acier de la CS Pointe-de l'Ìle
2003
0099-3440Evaluation of the physical stresses associated with wearing fire fighters' different personal protective clothing
 Denis Marchand
/ Université du Québec à Montréal Chantal Tellier
/ IRSST Guy Tremblay,
Vincent Cardinal
/ Université du Québec à Montréal
0099-0440Development and validation of a tool for calculating the service life of chemical cartridges
 Jaime Lara,
Daniel Drolet
/ IRSST Tapan K. Bose,
Daniel Cossement,
I. Bellasfar
/ Université du Québec à Trois-Rivières François Lemay,
Zélie Fortin
/ IRSST
2001
0099-1800Instruction of follow-up to a project on the health and safety risks of a high pressure and very high pressure water jet
 Yves Montpetit
/ ErgoExcel-Consultant
0099-1760Validation of a shoring system made with a high density polyethylene pipe (HDPE) or metal section normally used for culverts or sewers
 André Lan
/ IRSST Denis LeBoeuf
/ Université Laval Omar Chaallal
/ École de technologie supérieure Renaud Daigle
/ IRSST
0099-1010Protective Gloves: Study on the Resistance of Gloves to Multiple Mechanical Aggressors
 Jaime Lara,
Denis Turcot,
Chantal Tellier
/ IRSST Toan Vu-Khanh
/ Université de Sherbrooke
2000
0099-0300Development and validation of a method to evaluate temporary railing built and installed on construction sites
 André Lan,
Jean Arteau,
Renaud Daigle
/ IRSST Richard Roux
/ École Polytechnique
0099-0250Working from heights and protection against falls from heights for tree pruner
 Jean Arteau
/ IRSST Yves Beauchamp
/ École de technologie supérieure Ian Langlais
/ Ian Langlais, consultant Richard Roux
/ École Polytechnique
0098-0850Development of service-life indicators for respirator cartridges. Phase III
 Jaime Lara,
Daniel Drolet
/ IRSST Pierre Bernard,
Serge Caron
/ Institut national d'optique
1999
0099-0350Medical examination of respirator user
 Guy Perrault
/ IRSST
0098-0660Preparation of a field guide to the selection of respirators currently used in Québec
 Jaime Lara,
Guy Perrault,
Mireille Vennes
/ IRSST
1998
0098-0220Selection criteria for safety boots used during high- and very-high-pressure blasting, and identification of the most appropriate currently available equipment
 Daniel Imbeau
/ IRSST Yves Montpetit
/ ErgoExcel-Consultant
0097-1230Research on protective equipment used by domestic waste collectors
 Denis Giguère
/ IRSST Serge Guertin
/ Ergo Norme inc. Daniel Imbeau,
Jaime Lara
/ IRSST
1997
0097-0700Tarping methods used in the transport of wood chips
 André Lan
/ IRSST
0097-0190Preparation of a guide for respiratory protection equipment
 Jaime Lara,
Mireille Vennes,
Guy Perrault,
Daniel Drolet,
François Lemay
/ IRSST
0095-8360Design of shoring suitable for urban excavation work
 André Lan,
Jean Arteau
/ IRSST Denis LeBoeuf,
Omar Chaallal
/ École de technologie supérieure Jean-Marc Dugré
/ Jean-Marc Dugré inc.
0095-8330Resistance of protective garments to industrial solvents: Validation of a predictive model of resistance and production of a selection guide.
 Jacques Desnoyers,
Gérald Perron
/ Institut national de la recherche scientifique-Santé Jaime Lara
/ IRSST
0095-8320Exploratory study for the development of service-life indicators for organic-solvent face mask filters. Phase 2
 Pierre Bernard,
Serge Caron
/ Institut national d'optique Jaime Lara,
Daniel Drolet
/ IRSST
1996
0096-0530Hand protection in the Metal Products Fabrication Sector
 Chantal Tellier,
Jaime Lara,
Renaud Daigle,
Serge Massé
/ IRSST
0096-0120Intervention programme for prevention and inspection activities - Falls from height in the construction sector
 Jean Arteau,
André Lan
/ IRSST
0095-8350Protective clothing for firefighters
 Martin Filteau,
Dominique Duhamel,
Marek Weltrowski
/ Centre des technologies textiles
0095-8340Evaluation of protective boots for forestry work
 Denis Turcot
/ IRSST
1995
0095-3020Refinement of methods to evaluate the resistance of firefighter's protective footwear to perforations and cuts
 Jaime Lara,
Serge Massé
/ IRSST
0095-2200Validation of a shoring technique for excavation in urban environments: protoype design and production
 André Lan,
Jean Arteau
/ IRSST Jean-Marc Dugré
/ Jean-Marc Dugré inc.
0095-2090Study of the "climbability" of wood poles by linemen
 Jean Arteau
/ IRSST Yves Beauchamp,
Marc Thomas
/ École de technologie supérieure Denis Marchand
/ Université du Québec à Montréal
1994
0094-1180Mechanical validation of fall-arrest equipment proposed by Hydro-Québec
 Luc Chouinard
/ Université McGill Jean Arteau
/ École de technologie supérieure
0094-0660Design of a test stand used to standardize protective clothing classification according to cuttin resistance
 Serge Massé,
Jaime Lara,
Christian Sirard,
Denis Turcot
/ IRSST
0094-0640Practical guide to trench and excavation design
 Mohammad Hosseini
/ Consultants Sol-Géo inc.
0094-0320Analysis of work ergonomics and psycho-physical assessment of positioning equipment incorporating a fall-arrest device
 Yves Beauchamp
/ École de technologie supérieure Jean Arteau
/ IRSST
1992
0091-0100Design of an anchor post for lateral safety lines
 Jean Arteau
/ IRSST Georges McIntyre
/ École Polytechnique
1991
0090-0070Performance trials of protective boots for forestry workers
 Denis Turcot,
Jean Arteau,
Jérôme Boutin,
Renaud Daigle
/ IRSST
1990
0091-1110Scaffolding for the construction of buildings of less than five stories. Phase 1: Nature and safety of existing work practices
 Daniel Imbeau,
Yves Beauchamp,
Paul-André Courtois,
Pierre C. Dessureault
/ Université du Québec à Trois-Rivières
0090-1310Preliminary study of shoring for shallow trenches
 Jean Arteau
/ IRSST Jean Lafleur
/ École Polytechnique
0090-1200Limits to the use of hearing aids in noisy workplaces
 Raymond Hétu
/ Université de Montréal
0090-1030Development and optimisation of an air-bag seat and a pneumatic suspension for truck drivers (Phase 1)
 Philippe Lalande
/ Lalande Inc. Dominique LeBorgne
/ ERGEV Michel Letendre
/ Letendre et Associés Jacques Payer,
Serge Langford,
Raymond Larochelle,
Christian Lemoyne,
Lionel Talbot,
Marc Thomas
/ Centre de recherche industrielle du Québec
1989
0089-0260Development of a respiratory protection system affording total protection against isocyanates
 Jacques Lesage,
Claude Ostiguy
/ IRSST
0089-0230Computer modelling of soft-clay trenches
 Jean Lafleur,
Vincent Silvestri,
Michel Soulie
/ École Polytechnique
0088-0430Development of a range-limiting device for mobile cranes
 Pierre Michaud
/ Centre de recherche industrielle du Québec Joseph-Jean Paques
/ IRSST Pierre Van Dike
/ Centre de recherche industrielle du Québec Réal Bourbonnière
/ IRSST
0088-0390Development of a standard test for the evaluation <br/>of the chemical resistance of protective gloves
 Jaime Lara
/ IRSST
1988
0088-0240Multipurpose guardrail for formwork and concreting work: development of an anchor and proposal of an evaluation prototype
 Raimon Bertrand
/ Virginia Polytechnic Institute and State University
0088-0210Development of a coextrusion-blowing technique for the development of flexible gloves
 Pierre Lafleur
/ École Polytechnique Jaime Lara
/ IRSST
0087-0340Lock-out techniques for sawmill equipment
 Joseph-Jean Paques,
Serge Massé,
Raymond Bélanger
/ IRSST
0087-0330Development of standard laceration- and puncture-resistance tests for protective gloves
 Jaime Lara
/ IRSST
0087-0100Study of the protective gloves used in slaughterhouses
 Nicole Vézina
/ Université du Québec à Montréal
0087-0090Occupational health and safety hazards and psychosocial factors associated with the use of personal and collective protective equipment
 Marcel Simard,
Suzanne Desjardins,
Alain Marchand,
Chantal Saint-Jacques
/ Université de Montréal
1987
0087-0320Use of permeability indices to estimate the chemical resistance of gloves
 Jaime Lara
/ IRSST
0087-0290Development of a new type of safety fence for use in the construction industry
 Jean Arteau
/ IRSST Raymond Bertrand
/ Atelier de design urbain de Montréal
0087-0080A protective visor for forestry workers
 Martin P. Pernicka
/ Ovifo Design
0086-0200Experimental study of the risks associated with soft clay excavations
 Jean Lafleur
/ École Polytechnique
1986
0086-0300Characterization of blast guards
 Dominique Landat,
Jean Arteau
/ IRSST
0085-0210Safety and scaffolding work in conventional formworking
 Georges Toulouse
/ IRSST
1985
0085-0430Development of a test bed for the assessment of leg protection for chain-saw operators
 Jean Arteau,
Denis Turcot
/ IRSST
0085-0310Impact of robotics on work organization, employment, the economy, and occupational health and safety
 Gérald Lescarbeault
/ IRSST
1984
0084-0040Risk assessment for excavation workers
 Jean Lafleur,
Vincent Silvestri,
Michel Soulié
/ École Polytechnique
|
| |
 |  |    |
| |
|